Parameters in LabVIEW-model
These parameters have to be set before converting to a VeriStand-model.
| Nr. | parameter | value | unit | description | comment |
|---|---|---|---|---|---|
| none |
Parameters in VeriStand
These parameters have to be set in the system definition file of VeriStand by setting the initial values.
| Nr. | parameter | value | unit | description | comment |
|---|---|---|---|---|---|
| 1 | T_max_HWS | 70 | °C | temperature in the domestic hot water storage that corresponds to SOC=100% | in Conversion_SF1_64/ Inports/ ParametersSF1 |
| 2 | T_max_TS1 | 90 | °C | temperature in the thermal storage that corresponds to SOC=100% | in Conversion_SF1_64/ Inports/ ParametersSF1 |
| 3 | T_reference_HWS | 20 | °C | temperature in the domestic hot water storage that corresponds to SOC=0% | in Conversion_SF1_64/ Inports/ ParametersSF1 |
| 4 | T_reference_TS1 | 20 | °C | temperature in the thermal storage that corresponds to SOC=0% | in Conversion_SF1_64/ Inports/ ParametersSF1 |
| 5 | true_4_Sensors_false_10 | 0 (false) | bool | determines weather the measurements of the 4 internal storage temperature sensors are taken for the calculation of the energy content of the storage or the 10 outer storage temperature sensors true (1) - 4 inner sensors false (0) - 10 outer sensors | in Conversion_SF1_64/ Inports/ ParametersSF1 |
Parameters of / at the hardware
These parameters have to be adjusted at the hardware itself. They can be found in the subsections of the hardware section.