Ender 3
The Ender 3 is based on the Creality CR-10 and is used as our main printer. We use a total of 11 of them. The workshop uses this printer to introduce the participants to 3D printing. Due to its open design, it is ideal for explaining and observing various aspects of printing. This machine can also be easily extended and improved with printed parts.
Specifications
| Print volume (X Y Z): | 220mm x 220mm x 250mm |
| Nozzle diameter: | 0.4mm |
| Heated Bed: | Yes |
| Extruder: | Bowden extruder |
| min Z-Resolution: | 0.1mm |
| Supported filament: | PLA, ABS, PET(G), TPU* |
| Filament diameter: | 1.75mm |
| Special features: | Removable print surface |
Renkforce RF1000
Specifications
| Print volume (X Y Z): | 245mm x 200mm x 230mm |
| Nozzle diameter: | 0.5mm |
| Heated Bed: | Yes |
| Extruder: | Direct drive |
| min Z-Resolution: | 0.05mm |
| Supported filament: | PLA, ABS, PET(G), TPU |
| Filament diameter: | 3/2.85mm |
| Special features: | LED lighting |
Prusa i3 MK3
Specifications
| Print volume (X Y Z): | 250mm x 210mm x 210mm |
| Nozzle diameter: | 0.4mm |
| Heated Bed: | Yes |
| Extruder: | Direct drive |
| min Z-Resolution: | 0.05mm |
| Supported filament: | PLA, ABS, PET(G), TPU |
| Filament diameter: | 1.75mm |
| Special features: | No end stop switches (hit detection via power consumption of the stepper motors) |
BCN3D Sigma
Specifications
| Print volume (X Y Z): | 210mm x 297mm x 210mm |
| Nozzle diameter: | 0.4mm |
| Heated Bed: | Yes |
| Extruder: | 2x Bowden extruder |
| min Z-Resolution: | 0.05mm |
| Supported filament: | PLA, ABS, PET(G), TPU* |
| Filament diameter: | 2.85mm |
| Special features: | Touch display Dual extruder (simultaneous or two-color printing) LED lighting |